2005 UTECO Horizon D/TH model 130 | single pass laminator
2005 UTECO Horizon D/TH model 130 | single pass laminator
Adresse:Amérique du Nord
ou
Appelez +39 346 4948054
Description
Pre-owned Uteco Horizon D/TH model 130 single pass laminator purchased brand new in the year 2005 and in good condition and in regular production.
Dual turret, flying splice, water/solvent capable, 1000fpm, 6"/3" core adapters and 2 treaters.
Recent upgrade to PLC, web guide and control panel. New doctor blade assembly and new particle brakes.
Avauiable spare doctor blade chamber, timing belts, tilt plates, anilox roller, particle brakes and host of small value electronic/mechanical components.
PET, BOPP, CPP, ALU foil, LLDPE, Papers and a variety of other substrates have been running on it.
Visible in operation and available for sale.
Caractéristiques
| Fabricant | UTECO |
| Modèle | Horizon D/TH model 130 |
| Année | 2005 |
| Condition | Used (visible in production) |
| Film width | max. 1350 mm (53”) |
| Coating width: | max. 1300 mm (51") |
| Mechanical speed | 1000 fpm (305 m/min) |
| Production speed | The production speed depends on the following conditions: - type of material; - type of glue; - required quality, etc |
| Materials to be coated | BOPP 18-40μ | PA 12-30μ | PET 12-24 μ | PAPER 60-100gr/m2 | LAMINATES 60-100gr/m2 |
| Materials to be laminated | BOPP 12-40μ | CPP 12-40μ | PA 12-30μ | CPA 12-30μ | LDPE 20-120μ | PET 12-24μ | ALU FOIL 9-18 μ | PAPER 40-80gr/m2 | LAMINATES 40-80gr/m2 |
| First unwinder reel diameter | 800 mm |
| Secondary unwinder reel diameter | 800 mm |
| Rewinder diameter | 800 mm |
| Cores | Inside diameter 76 mm (3”) |
| Expansible Pnematic Adaptors | Inside diameter 152 mm (6”) |
| Reel shafts | pneumatic |
| Materials sequence | from left to right |
| Type of job | dry coated | rotogravure lacquering |
| plant voltage supply | 480 V +/- 5% |
| Power supply | 400 V +/- 10% 3 phase |
| Main line frequency | 60 Hz +/- 2% |
| Compressed air supply | Non-lubricated, dried and filtered | Pressure: 6 bar (86 PSI) | Dew point: + 2°C (36°F) |
| Chilled water specification | Filtration clarity: less than 20 μ | Pressure: min. 2 bar (29 PSI) max.3 bar (44 PSI) | Inlet temperature (chilled rolls, with room temperature 20°C (68°F)): 15°C to 18°C 59°F to 65°F | Hardness (Ca CO3): 2.5 to 4 mg/lt 2.5 to 4 ppm | pH: 7 to 8.2 |